Fleece Throw Blankets in Bulk (50×60): A Reseller’s Buying Guide

Fleece throw blankets in bulk are the volume workhorse of the throw category: polyester fleece throws, most commonly listed at 50 × 60 inches, sold in case packs of commonly 24 units with assorted or fixed color mixes. For resellers, the buying logic is carton-level math — units per case, color mix, and GSM band — not the per-piece styling that drives higher-tier throws.

Consider a common scenario: a reseller who sells gift-ready faux fur throws sees the bulk fleece listings and decides to add a value tier — the same product family, a lower price point, a straightforward line extension. The first order goes out with “fleece throw, assorted colors” as the spec and the freight estimated per piece from the faux fur program. Then the surprises arrive in the warehouse: the case packs arrive 24 to a carton in a color ratio nobody chose, the throws measure thinner than the listing photos suggested, and the landed cost per piece is higher than quoted because the carton’s piece count was never confirmed against the freight math. None of it is a quality problem. A bulk fleece program runs on case-pack lines — units per carton, color ratio, GSM band — that the PO never wrote.

What does “bulk” actually mean for fleece throw programs?

For fleece throws, “bulk” means buying in case packs: published wholesale listings commonly ship the throws 24 units per export carton, with the color mix stated per case. Two commonly published examples show the reality — one wholesale listing packs 24 super-lightweight 50 × 60 fleece throws in 8 assorted colors per case, another lists 24 blankets per wholesale case in six colors with a stated 4-4-4-4-4-4 color ratio and requires ordering in increments of 24. The case is the unit of purchase, and the color mix inside the case is part of the program you are buying.

The distributor math that follows from this: your SKU count, your color depth, and your reorder quantity all move in multiples of the case count. A program that needs 10 units of navy and 10 of grey does not exist when cases are fixed-assortment — it exists only when the factory quotes solid-color cases or custom mixes. Confirm on the RFQ whether cases ship assorted or solid per color, what the color ratio is, and whether the mix is fixed or customizable, because the “assorted” line on a listing is a program decision, not a decoration.

This is the same carton-level discipline as the faux fur case-pack program (see How to Buy Faux Fur Throws in Bulk), applied to a value-tier product where the margins forgive less arithmetic error.

Why is 50 × 60 the wholesale default size?

Because the trade converged on it: bulk fleece throw listings publish 50 × 60 inches as the standard wholesale size across programs — the same dimension that the throw-size chart guide corroborates as the commonly listed US throw size from a retail-published size chart (see Throw Blanket Sizes Chart). Use it as the default spec, not an industry law — some programs publish 60 × 80 or oversized formats — but for a reseller buying bulk fleece, 50 × 60 is the size the market prices against, which makes it the only size where quotations are truly comparable.

The size discipline on the PO is the finished-measurement line: finished dimensions measured flat and relaxed, with the tolerance agreed in writing and the wash condition named (before or after wash). Fleece throws shrink with wash like any textile — the dimensional-change discipline from the lab-test guide applies (see How to Read a Textile Lab Test Report) — so a size spec without a wash condition is an incomplete spec. Do not adopt “50 × 60” as a guarantee from a listing title; write it as a finished-dimension line with tolerance.

What should the GSM line say on the PO?

Name the GSM band and compare quotations only at equal GSM — because fleece is a single-face product where the fiber weight is the main material cost, and two “fleece throw” quotations at different GSM are not the same product. Published wholesale programs quote bands from roughly 140 GSM at the lightweight end through 170–180 GSM midweight programs and up into heavier bands; both bands are real products with different price points and different hand feel.

The conditional logic, not a ranking: the lightweight band buys the lowest landed cost and the most compressible packing — the right program for events, promotions, and giveaway channels where the throw is a volume item. The midweight band buys a noticeably fuller hand feel and the drapability that retail display programs need. Neither is “better” in the abstract; the match is between the GSM band and the channel the reseller serves. What is never acceptable is comparing a 140 GSM quotation against a 180 GSM quotation on price alone — that is comparing different products, and the GSM-banding rule from the pile-density guide applies here too (see Faux Fur Pile Density (GSM) Explained).

Write the GSM as a quoted band with the weighing method named (the mass-per-unit-area discipline), and confirm the tolerance you and the factory can hold in writing — commonly quoted tolerances exist, but the agreed number is the spec.

Which edge finish and print options belong on the spec?

Edge finish is the construction line that separates bulk fleece programs on both cost and appearance. The finishes in common circulation are whipstitched (overlock-stitched) edges, bound edges, and serged edges — and one published wholesale program names whipstitched edges explicitly on its 50 × 60 listing. The conditional logic: whipstitched edges buy the lowest cost and the fastest production; bound edges buy the retail-finished look and the most durable edge at a higher cost; serged edges sit between them. Match the edge to the channel — promotional bulk rarely needs bound edges, retail-display programs commonly do — and name the finish on the PO, because “fleece throw” without an edge line is three different products.

The print axis is solid-dyed versus printed. Solid-dyed programs buy the simplest dyehouse process and the cleanest color-matching; printed programs (all-over prints, team colors, licensed-style graphics) buy visual differentiation with the print-quality and wash-durability discipline that printed textiles require — the construction-method guide’s print-quality section applies (see Throw Blanket Construction Methods). Print-method claims follow the same conditional framing: sublimation, screen print, and digital each carry different wash-behavior and cost profiles, none unconditionally superior — name the method on the PO with the wash-test protocol behind it.

How do resellers structure a bulk fleece assortment?

Start from the case pack and work outward: the case count and color mix define the minimum program, and the assortment is built from whole cases, not from ideal per-color quantities. A practical starting structure for a reseller testing the category: one case of fixed-assortment 50 × 60 midweight throws as the entry buy, then solid-color cases for the colors that sell through first. Treat this as a starting assumption to rebalance against your own sell-through — the assortment guide’s principle applies here too (see How to Build a Throw Blanket Assortment Plan).

Color behavior follows the same channel logic as the rest of the throw category: neutral foundations (grey, black, cream, navy) commonly carry the steadiest replenishment, seasonal or event colors spike and fade. But the bulk fleece buyer’s discipline is per-color velocity — track which colors from each assorted case empty first, and convert the fastest colors to solid-color cases on the reorder. Do not adopt a fixed neutral-to-color ratio as an industry rule; the case contents and your sell-through data write the ratio together.

The program-level choice sitting above the assortment is the brand posture: plain bulk for the reseller’s own labeling (the private-label packaging discipline applies — see Private-Label Packaging Options) versus factory-labeled retail-ready. Name the posture on the RFQ, because the packing lines differ.

How do bulk fleece programs pack and ship?

Bulk fleece packs denser than any other throw construction — which is the freight advantage of the category — and the packing line on the PO names the method, the units per carton, and the carton dimensions for the freight quote. Fleece compresses well, so vacuum packing is a real option; the recovery question is the same one the packing-method guide describes, with the acceptance test run on the approval sample (see Roll Packing vs Vacuum Packing).

Two packing disciplines matter specifically for bulk programs. First, the units-per-carton line is the case line: published listings commonly quote 24 units per case, but the factory’s actual case count at your GSM band is the number the freight quote runs on — a heavier GSM band packs fewer units per carton, and the PO should carry the per-band line. Second, the polybag line: bulk programs commonly ship throws individually polybagged inside the case (the retail-ready packing discipline — see Retail-Ready Packaging) or case-packed loose for the reseller’s own packing. Name the choice, because the bag spec, the labeling on the case, and the export-carton marking fields all flow from it (see Export Carton Optimization).

What should you confirm when requesting a quote?

Send every bulk fleece RFQ with the same eight confirmations, because the category’s risks all live in the case-pack lines that per-piece buyers forget to write. Confirm them before the first order, not after.

1. Case definition — units per case, and whether the case count is fixed or varies by GSM band.
2. Color mix per case — assorted or solid, the stated ratio, and whether the mix is fixed or customizable.
3. Size line — 50 × 60 finished dimensions with tolerance agreed in writing, wash condition named.
4. GSM band quoted with the weighing method named — compare quotations only at equal GSM.
5. Edge finish named — whipstitched, bound, or serged — with the print method named where applicable.
6. Labeling and packaging posture — plain bulk for own labeling vs factory-labeled retail-ready, polybag spec, case marking.
7. Reorder rhythm — the per-color velocity tracking that converts assorted cases to solid-color cases.
8. Wash protocol with acceptance criteria — cycles, temperature, drying condition, dimensional-change band — agreed in writing.

What do resellers ask before ordering fleece throw blankets in bulk?

What is the standard size for wholesale fleece throw blankets?

50 × 60 inches is the most commonly listed wholesale size across bulk fleece programs, corroborated by published wholesale listings and a retail-published size chart — use it as the default spec, not an industry law. Some programs publish 60 × 80 or oversized formats. Write the size as a finished-dimension line with tolerance and the wash condition named, because fleece shrinks with wash.

What does GSM mean on a fleece throw quotation?

GSM is grams per square meter — the fabric weight, and the main material cost in a fleece throw. Published bulk programs commonly quote from roughly 140 GSM at the lightweight end through 170–180 GSM midweight and up. Compare quotations only at equal GSM, because a lower-GSM throw is a different product than a higher-GSM throw regardless of the price.

How many fleece throws come in a wholesale case?

Published wholesale listings commonly quote 24 units per export case with a stated color mix (for example, 24 throws in 8 assorted colors, or 24 in six colors at a 4-4-4-4-4-4 ratio). But the case count is a per-program number — it varies by GSM band and factory — so the factory’s actual case contents are the contract term, not the listing you read.

Can bulk fleece throws be custom printed or custom colored?

Commonly yes — printed and custom-color programs exist — but the customization changes the spec lines: the print method is named on the PO with a wash-test protocol, and custom colors run through the lab-dip and shade-band discipline rather than the stock-color mix. See the custom-program guide for the full process.

Are bulk fleece throws machine washable?

Polyester fleece is inherently washable, but “machine washable” on a PO is a protocol, not a property: name the cycles, temperature, and drying condition with acceptance criteria (dimensional-change band, edge integrity, print durability where applicable) agreed in writing. Do not copy a retail listing’s care line into the PO as a test protocol.

Request a quotation

If bulk fleece throws are entering your program, send us the case structure you need — assorted or solid-color cases, the GSM band and edge finish your channel requires — and the color mix your sell-through supports. We will return a per-case quotation with the size, GSM, edge, and packing lines specified the way a bulk program demands, so the cartons that arrive match the program you priced against.

Sources & Further Reading

• RetailMarket — Moda West Case of 24 wholesale fleece throw blankets — published trade evidence: 50 × 60 in, 140 GSM, 24 units per wholesale case in 8 assorted colors; the case-pack reality this guide is built on.
• Alan Hyman Enterprises — Fleece Blankets 50 × 60 assorted colors — published trade evidence: 24 blankets per wholesale case, 170–180 GSM, whipstitched edges, 4-4-4-4-4-4 color ratio, ordered in increments of 24.
• Throw Blanket Sizes Chart: Standard Dimensions Retailers Should Stock
• How to Buy Faux Fur Throws in Bulk: Case Packs, Color Ratios and Reorder Math
• How to Build a Throw Blanket Assortment Plan
• How to Source Faux Fur Throws from China
• Export Carton Optimization for Throws