

If we find defective products during the product inspection in our warehouse, we will help you replace them for free. That promise is the starting point, not the whole system: before goods reach the warehouse, every order passes through six checks — materials, cutting, sewing, colour, packing, and final product quality — against the approved sample you signed off. This page explains what each check covers, the two inspection levels you can choose, and the testing and standards buyers ask about before the container sails.
The checks below come from the page’s own description of the service — materials, cutting, sewing, colour, packing, and final product quality — expanded into what is actually verified at each stage.
| Check | What is verified | What we ask you to confirm |
|---|---|---|
| Materials | Named face material and fibre composition, reverse material, and any fill — written out, not nicknamed | The exact material name per SKU; for sheepskin-look cushions, whether the brief is real sheepskin or custom faux fur |
| Cutting | Finished size, measurement method, and agreed tolerance, measured flat | Whether the measurement is diameter, length × width, or another method; the size grid per SKU |
| Sewing | Edge finish, seams, backing, closures, and fastening | Bonded vs sewn edges, removable vs fixed covers, and any fill-density targets — as open questions until confirmed |
| Colour | Colour reference, pile direction, and layout against the approved sample; batch-to-batch variation within the agreed range | The exact colour name — natural white is not the same as bleached white — and whether a reorder can be matched to the same dye lot |
| Packing | Exact unit pack, label placement, and condition after unpacking, especially for compressed rugs or vacuum packs | Whether the item ships flattened, rolled, vacuum packed, or boxed, and whether that pack suits your warehouse or marketplace channel |
| Final product | The finished goods against the approved sample, specification, and purchase order — before shipment | The inspection checklist, sampling approach, and treatment of nonconforming goods, agreed before production |
Construction details that change MOQ or cost should be written as open questions until confirmed: bonded vs sewn edges, removable cover vs fixed cover, fill density targets, and whether mixed sizes share one carton plan. Ask which requested changes affect price, minimum quantity, or timing; do not assume the original quotation covers a revised construction.
General inspection — free. Whether you use our plan or your own, your goods are sent to our warehouse and checked with our free general inspection service. We check your products based on Level II, AQL 2.5, just as other inspection companies do. When there are defective products, if you use our selected suppliers, we can solve the quality issue without charging extra fees. If it is your own suppliers, we will help you to talk with them until the problems are solved — but you need to pay the logistics cost, travelling fee, and related costs. If you want a specific inspection solution or a lower defect rate, please contact our agent to find out if there are extra fees.
Full inspection — $5/hour. If you want to reduce the defect rate to 0%, we recommend the full inspection service: we pick out all the defective products from the whole order. The standard price is $5/hour. Tell our agent what your needs are and get a quote for the full inspection.
Fire safety and chemical compliance are market-specific, and the standards that apply depend on your product and destination. The list below is drawn from our buyer guides — it is general information, not a certificate for any product. Confirm scope with compliance counsel and an accredited lab for your exact product and market.
Test the strike-off or proto fabric before bulk production, once fabric construction and fibre content are frozen. Textile compliance testing commonly takes 1–3 weeks depending on the parameter list and the lab’s queue; flammability turnaround is commonly one to three weeks — confirm timing when you book, since a failure plus re-testing doubles the timeline. Test what you ship: the report must match the bulk construction, fibre content, and any flame-retardant finish. Many flame-retardant chemical finishes degrade with laundering, so a fabric that passes new can fail after a few wash cycles — have the lab test washed specimens, not just new fabric, and put the finish name and wash-durability clause on the PO. Retest whenever the construction, fibre content, or finish changes, confirm with the lab whether new colourways need separate reports, and keep every report on file per SKU and lot.
Add the compliance and inspection terms to the order in writing. One line turns compliance from a hope into a contractual condition: “Goods must comply with REACH Annex XVII; supplier to provide third-party test report before shipment.” Also add: the batch number to be marked on cartons and invoice; the tanning method and any test report to be supplied with the shipment where relevant; the colour-fastness expectation for the intended market; and a reference sample to be kept from the same batch. Agree the inspection checklist, sampling approach, and treatment of nonconforming goods before production — not at the port, when re-making the goods is no longer possible.
Q: What happens if defective products are found during inspection?
A: We will help you replace them for free. If you use our selected suppliers, we can solve the quality issue without charging extra fees; if they are your own suppliers, we will help you talk with them until the problems are solved, and you cover the logistics and travelling costs.
Q: What is the difference between general and full inspection?
A: General inspection is free and checks your products based on Level II, AQL 2.5, the same standard other inspection companies use. Full inspection picks out all defective products from the whole order, aiming for a 0% defect rate, at a standard price of $5/hour — tell our agent your needs and get a quote.
Q: Do I need flammability or chemical testing for every order?
A: It depends on your product and destination market. Throws people wrap around themselves are commonly tested under 16 CFR 1610 in the US; EU-bound textiles fall under REACH by law, with OEKO-TEX certification often required by customers as a contractual condition. Send us your product list and target markets, and we will return a test plan — which standards apply to each SKU, when in the timeline to test, what to put on the PO, and who pays for each test.
Talk with our agent: tell us your product list, target markets, and inspection needs, and we will confirm the checklist, the inspection level, and the test plan before production starts.